U267D BMW Fault Code
Check U267D OBD Fault Code ReasonThe Throttle Position sensor signals the Engine Control Module as to the current position of the engine throttle valve.
The current throttle valve opening is based on the driver's input from the gas pedal.
The ECM uses the information from this sensor to help calculate fuel delivery and spark timing.
U267D Code Symptoms :
When you turn on the ignition, the Service Engine Soon or Check Engine U267D light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the U267D!
Diagnosis And Repairing U267D
U267D OBD2 reports a sensor fault, replacement of the sensor is unlikely to resolve the underlying problem. The fault is most likely to be caused by the systems that the sensor is monitoring, but might even be caused by the wiring to the sensor itself.
How to fix U267D code ?
- Faulty Air Flow Meter
- Damaged camshaft position (CMP) sensor
- Clogged or faulty fuel injector (s)
- Fuel injectors harness is open or shorted
At this point we are assuming that the fuses and relays are good. You will need to locate the PCM/TCM and the power input signal circuit using your vehicle information source.
Unplug the connector from the PCM/TCM, place the ignition switch in the ON position, and probe the appropriate circuit with the positive test lead of the DVOM.
